周期脉冲撞击的两分量Bose-Einstein凝聚系统的单粒子相干和对纠缠     

严冬  宋立军 《海洋学报》2010,32(10):6832-6836

在周期脉冲撞击的两分量Bose-Einstein凝聚系统中,研究了量子混沌对单粒子相干和对纠缠性质的影响.研究表明,混沌促使单粒子相干发生强烈衰减并保持着较低的相干度,同时对纠缠出现最大值并在较短时间后消失.利用单粒子相干的这种性质可以直接测量量子混沌存在的相空间结构,有利于预防Bose-Einstein凝聚的瓦解和控制凝聚体的混沌行为.  相似文献   

不同预处理方法对南海东沙海域沉积物粒度的影响   总被引：1，自引：0，他引：1  

商和辉  林伟清 《海洋地质与第四纪地质》2010,(1)

通过采用不同方法对东沙沉积物样品进行了预处理,并采用综合法进行了粒度分析,以探讨东沙沉积物中碳酸盐和有机质对其粒度的影响。结果表明,去除有机质后沉积物的平均粒径和63～4μm粒径范围内的组分明显减小,有机质含量变化与平均粒径变化呈明显负相关,说明东沙沉积物中有机质的沉积是伴随细粒悬浮物质和胶体物质沉积下来的,且对细颗粒有明显的絮凝作用;去除碳酸盐后沉积物的平均粒径呈减小趋势,但粒径范围内组分含量的变化不明显,且碳酸盐含量的变化与沉积物粒径变化的关系也不甚密切。  相似文献   

Investigation into the effect of fault properties on wave transmission          下载免费PDF全文

H.R. Mohammadi  H. Mansouri  M. Bahaaddini  H. Jalalifar 《国际地质力学数值与分析法杂志》2017,41(17):1741-1757

The estimation of wave transmission across the fractured rock masses is of great importance for rock engineers to assess the stability of rock slopes in open pit mines. Presence of fault, as a major discontinuity, in the jointed rock mass can significantly impact on the peak particle velocity and transmission of blast waves, particularly where a fault contains a thick infilling with weak mechanical properties. This paper aims to study the effect of fault properties on transmission of blasting waves using the distinct element method. First, a validation study was carried out on the wave transmission across a single joint and different rock mediums through undertaking a comparative study against analytical models. Then, the transmission of blast wave across a fault with thick infilling in the Golgohar iron mine, Iran, was numerically studied, and the results were compared with the field measurements. The blast wave was numerically simulated using a hybrid finite element and finite difference code which then the outcome was used as the input for the distinct element method analysis. The measured uplift of hanging wall, as a result of wave transmission across the fault, in the numerical model agrees well with the recorded field measurement. Finally, the validated numerical model was used to study the effect of fault properties on wave transmission. It was found that the fault inclination angle is the most effective parameter on the peak particle velocity and uplift. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Modelling the flow of self‐compacting concrete     

S. Kulasegaram  B. L. Karihaloo  A. Ghanbari 《国际地质力学数值与分析法杂志》2011,35(6):713-723

A Lagrangian particle‐based method, smooth particle hydrodynamics (SPH), is used in this paper to model the flow of self‐compacting concretes (SCC) with or without short steel fibres. An incompressible SPH method is presented to simulate the flow of such non‐Newtonian fluids whose behaviour is described by a Bingham‐type model, in which the kink in the shear stress vs shear strain rate diagram is first appropriately smoothed out. The viscosity of the SCC is predicted from the measured viscosity of the paste using micromechanical models in which the second phase aggregates are treated as rigid spheres and the short steel fibres as slender rigid bodies. The basic equations solved in the SPH are the incompressible mass conservation and Navier–Stokes equations. The solution procedure uses prediction–correction fractional steps with the temporal velocity field integrated forward in time without enforcing incompressibility in the prediction step. The resulting temporal velocity field is then implicitly projected on to a divergence‐free space to satisfy incompressibility through a pressure Poisson equation derived from an approximate pressure projection. The results of the numerical simulation are benchmarked against actual slump tests carried out in the laboratory. The numerical results are in excellent agreement with test results, thus demonstrating the capability of SPH and a proper rheological model to predict SCC flow and mould‐filling behaviour. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Sediment and particulate phosphorus characteristics in grassed waterways from row crop corn and alfalfa fields collected by manual University of Exeter samplers and automatic sampling     

John C. Panuska  Laura Ward Good  Peter A. Vadas  Dennis L. Busch  Asli Ozkaynak 《水文研究》2011,25(15):2329-2338

Phosphorus (P) export from agricultural lands above known threshold levels can result in adverse impacts to receiving water quality. Phosphorus loss occurs in dissolved and sediment‐bound, or particulate phosphorous (PP), forms, with the latter often dominating losses from row‐cropped systems. To target practices, land managers need good computer models and model developers need good monitoring data. Sediment monitoring data (e.g. radiometric finger printing and sediment P sorption capacity) can help identify sediment source areas and improve models, but require more sediment mass than is typically obtained by automatic sampling. This study compares a simple suspended sediment sampler developed at the University of Exeter (UE) with automatic sampling in intermittent channels draining corn and alfalfa fields. The corn field had a greater runoff coefficient (27%) than alfalfa (11%). No differences were found in enrichment ratios (sediment constituent/soil constituent) in PP (PP_ER) or percent loss on ignition (LOI_ER) between paired UE samplers on corn. The median LOI_ER for the UE samplers (1·9%) did not differ significantly (p > 0·13) from the automatic sampler (2·0%). The PP_ER from the UE samplers was on average 20% lower than the automatic samplers. A correlation (r² = 0·75) was found between sediment PP and % LOI from automatic samplers and UE samplers for particles < 50 µm, while for > 50 µm PP concentration did not change with changes in % LOI. Sediment ammonium‐oxalate extractable metals were similarly related to LOI, with the strongest correlation for iron (r² = 0·71) and magnesium (r² = 0·70). Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

有限空间中三维壁面紊动射流流动特性试验研究          下载免费PDF全文

张星星  陈明  许光祥  黄海津 《水科学进展》2019,30(1):93-101

为了研究三维壁面紊动射流前方布置的垂直挡板对时均流动特性的影响,采用粒子图像测速技术对不同雷诺数和淹没水深条件下的流速场进行了测量,统计分析了U速度剖面分布、速度半宽值变化和最大速度衰减规律。结果表明:沿射流方向具有3个明显不同的衰减区,依次划分为自由边界下的三维壁面射流区（Ⅰ区）、垂直挡板影响区（Ⅱ区）和近壁区（Ⅲ区）。在重点分析的Ⅱ区内,3个特征物理量的分布规律均与雷诺数无关;在垂直挡板影响下,速度半宽值扩展率明显加快,发展更为充分;在水深H~1.75H范围内,射孔中垂面内速度半宽值扩展率为0.043,同时0.5H的递增对射孔中心水平面内速度半宽值的分布较为敏感,其扩展率由0.205增至0.270;最大速度衰减对水深的改变并不敏感,且在Ⅱ区加速衰减,衰减指数为1.095。通过与半无限空间中三维壁面射流径向型衰减区的流动特征比较,Ⅱ区与之相似,将Ⅱ区视为提前进入径向型衰减区。  相似文献   

砂土颗粒三维形态的定量表征方法     

付茹  胡新丽  周博  汪华斌  王剑峰 《岩土力学》2018,39(2):483-490

颗粒形态是影响砂土力学特性的重要因素,特别是影响砂土在低应力状态下的抗剪强度、剪胀效应和临界状态行为,以及高应力状态下的颗粒破碎行为。因此,准确地重构砂粒的三维形态,并量化计算其形态表征参数是研究砂粒形态效应的前提工作。借助于高精度的CT扫描技术和图像处理技术,获得近海石英砂和风化花岗岩残积砂这两类砂土颗粒的三维形态信息。采用球谐函数序列实现两种砂颗粒三维形态的准确重构,并通过球谐函数分析计算砂土颗粒的体积来验证该方法的有效性。基于球谐重构的三维砂粒表面,提出了实用性的方法来计算砂粒的表面积、表面曲率和三维尺寸等,进而计算砂粒的三维球度、圆度和伸长率等形态表征参数。结果表明,当球谐函数阶达到15时,其重构的砂粒基本形状和表面纹理均与真实砂粒非常接近;近海石英砂在水流搬运和磨蚀的作用下颗粒形态较为规则和圆滑,球度和圆度较大,而风化花岗岩残积砂则在物理风化和剥蚀作用下颗粒形态较为复杂和粗糙,球度和圆度较小;而这两种地质作用对砂土颗粒的伸长率则没有明显的影响。  相似文献   

大石峡高面板坝筑坝砂砾料现场大型相对密度试验     

董承山  杨正权  王龙  何冰  刘莹光 《吉林大学学报(地球科学版)》2018,48(5):1603

当前,主要采用相对密度来表征筑坝砂砾料的密实程度,并以此来评价大坝的施工碾压质量。受试验设备尺寸和击实功能的限制,室内试验难以反映现场实际筑坝砂砾料粒径大、采用大型碾压机具进行高强度碾压的实际情况,试验确定砂砾料最大干密度值偏低,难以直接用于指导实际工程。针对大石峡高面板坝筑坝砂砾料,在工地现场采用实际筑坝碾压设备和大型相对密度桶,对原级配坝料开展相对密度试验,研究了坝料的压实特性,确定了不同级配（含砾量）坝料的相对密度特性指标。研究表明：比较室内试验成果,现场试验确定砂砾料最大干密度值有较大提高;随着含砾量的增加,砂砾料的最大、最小干密度值先增加、后减小,存在压实密度最高的最优含砾量特征值;强振碾压使得弱胶结砂砾料产生不同程度的颗粒破碎效应,颗粒破碎的程度和土料的原始级配特性相关联。  相似文献   

钙质砂抗剪强度特性的环剪试验   总被引：2，自引：0，他引：2  

黄宏翔  陈育民  王建平  刘汉龙  周晓智  霍正格 《岩土力学》2018,39(6):2082-2088

珊瑚礁沉积的钙质砂与石英砂的物理力学性质有较大差别。对取自南海岛礁的钙质砂进行了单次往返环剪试验以分析钙质砂的抗剪强度特性,试验中考虑了相对密实度和竖向应力对结果的影响,并与相同级配和试验条件下的石英砂进行对比分析。结果表明：钙质砂正向剪切时应力-位移曲线为软化型,具有明显的残余强度特性,而反向剪切时则表现为硬化型,正向和反向剪切强度基本一致;石英砂正向剪切和反向剪切均表现为软化型。钙质砂正向剪切和反向剪切残余强度与峰值强度的比值在0.75～0.93之间;石英砂正向剪切和反向剪切残余强度与对应峰值强度的比值在0.89～0.96之间。相同级配和试验条件下,钙质砂残余强度均大于石英砂,且强度比值基本保持在1.05～1.3之间。在100、200 kPa竖向荷载作用下,钙质砂0.5～2.0 mm的颗粒发生了破碎,破碎率分别为4%和6%。  相似文献   

Removal of Cd and Pb in Calcareous Soils by Using Na2EDTA Recycling Washing          下载免费PDF全文

Shujuan Zhang  Zhihui Yang  Baolin Wu  Yangyang Wang  Ruiping Wu  Yingping Liao 《洁净——土壤、空气、水》2014,42(5):641-647

  相似文献